Tag: nat
Cisco NAT failing for non-connected subnets
by rxtx on Aug.17, 2010, under Networks
This little problem had me scratching my head for a while, and as usual the solution is pretty simple. The scenario is that you have some kind of link from an ISP with static addresses. At some point you have outgrown your original assignment and have requested a new block, which the ISP has set up at their end. You want NAT an address on the new external subnet to an internal address as shown below. Now on a PIX or ASA you just set up the NAT rules and everything works, but in IOS things are a little more subtle. First the diagram and relevant initial configs. Note that the customer router only has an external IP on the first subnet – in our case this was due to a lack of spare addresses:
